1. Necessary items

2. Remove old Motor Arm

Turn the [motor arm] and remove the holding screw on the motor shaft.

2.5

Remove the old [motor arm] from the Motor Shaft.

3. Attach new motor arm

Attach the new [motor arm] horizontally on the motor shaft so that the screw hole on both the [motor arm] and the through hole in the shaft align.

3.5

Push Holding Screw through the two aligned holes on the motor assembly while holding the Nylon Hex Nut on the bottom side with your index finger. Tighten until the screw head is flush with the [motor arm].

If you encounter any issues during your maintenance, please reach out to contact@printed-plus.com